Dual Pleated Blind & Flyscreen
Please be aware, many Narrowboat windows open into the cabin area and may interfere with blinds that are installed incorrectly.
Dual Pleated blinds and fly screens offer fantastic flexiblity, they are both a blockout blind and a flyscreen. (Or neither).
Draw the pleated blockout fabric to the top to fully close the blind or move it to the bottom and draw down the flyscreen, this will allow light to pass into the cabin but helps prevent flys and insects from entering. Both the blind and the flyscreen are encased in a cassette frame which makes them very easy to install, only using four screws, one in each corner.
There are four frame colours, Black; White; Cream and Grey.
The flyscreens are all in black.
The pleated fabic in the Black frame is Dark Grey
The pleated fabic in the White frame is White
The pleated fabic in the Cream frame is Dark Cream
The pleated fabic in the Grey frame is Grey
Instructions are in the pictures for these blinds
Please note!
The 'block out' pleated fabric of the blinds will have punch holes for the operating cords to pass through (the wider the blind, the more punch holes), these will allow some light to pass through.
*If the colour of the fabric is important, please request a fabric sample of the colour you would like as shades are different depending on the computer used*
To aquire a price, choose from the dropdown size and colour menu's. Choose the size that is the next size up from what you require. For example- you have measured your window width as 89cm and a drop of 62cm, choose from the drop down menu Upto 90cm x 65cm. Then choose the colour from the colour menu and the cost of this blind will be shown.
When you have got your price and wish to proceed enter the sizes you actually require in the
" Record the width and Record the drop boxes"
Please be aware - If you are intending to install these Dual blinds on a Narrowboat, most Narrowboats windows open inwards, please make sure that the window, when fully open, will not interfere with the Dual blind. i.e.the window does not protrude into the cabin in front of the face of the surface you are mounting the blind.
The surounding frame of the blind is approx. 40mm wide all the way round, so the finished size of the blind will be approximately 80mm wider and the drop will be approximately 80mm greater than the sizes you provide.
(See picture in the photos section for these blinds ).
******************PLEASE READ THE MEASURING SECTION RELATING TO THIS PRODUCT***********************
Delivery time: is approximately 4 weeks from receiving the order.
**If you require a Dual blind which is out side these parameters please email sales@blindsforboats.co.uk with your sizes and we will provide you with a quotation.**
Returns policy
Anything damaged in transit will need to be reported to us within 24 hours of receipt and any other damage or fault within 48 hours of receipt so we can have the change to rectify this asap.
The products you order are manufactured according to the measurements you provide and therefore it is very important that your measurements are accurate.
We cannot accept the return of the goods due to the provided measurements being incorrect.
You are advised to read the How to Measure and How to Fit pages of our website or contact us by email on sales@blindsforboats.co.uk with your contact number, if you would like guidance on how to take the required measurements accurately.
If you realise that you have made an error after placing your order, please email our customer services team sales@blindsforboats.co.uk, as soon as possible. It may be possible to amend your order, as long as the products are not in the process of being made. Once the product is in manufacture, we will not be able to cancel or make changes to the order.
We strongly recommend that you also check the order details on the confirmation email, and advise us immediately if anything is incorrect.